Over the past week, some of our readers have reported that they are encountering Terminal Services with error 0x2740.
Get your PC back to its best with ASR Pro
One man’s business: thisThe problem may indicate that there may be an additional application on the terminal serverusing the same TCP port as Remote Desktop Protocol (RDP). StandardPort assigned to Is rdp 3389. Can you use PULIST to check what software this is?Use our port 3389. This can help a lot.
YouYou can use PULIST from this Windows Resource Kit to find whereThe process is using the provided port. Example: pullist | find/i TV screen “4125” can …
Case 2. WhenIf you are using an RDC connection to an online terminal system, you can get an activity id of 1036 andone of the following messages:
ClientFailed to connect to the remote computer.
Remote connections may not be enabled or the computer may be too busyaccept newly found connections.
It is also possible that a network problem is interfering with your connection.
Please try again later. If the pain persistsContact the administratorspeaker.
Reason:The network card has nothing to do with what an RDP-TCP connection can do. For troubleshooting, make surethat the correct NIC is bound to the rdp-tcp connection.Do the following:
1. On the server, connect locally to the web hosting server (not remotely fromDesktop/terminal client).
2. Click “Start”, “Run”, quote “tscc type.msc /s” (no checkmarks and please clickGood.
3. In the Terminal Services Configuration snap-in, double-click Connections,then RDP-TCP on the right panel.
4. Click the Network adapters tab, select the correct network adapter andClick OK.
5. Make sure you need to configure RDP to connect to our server.3:
If youcannot access TS with event ID 1036: TerminalFailed to create server session. The corresponding rank code was 0x2740. vError mode 0x2740 = decimal 10048., which means “Only one use of each kindSocket (protocol/network address/port) is normally allowed.The Terminal Services configuration is configured so that the RDP protocol only focuses on it.one session
Option 4. Operation inIn another instance of code 0x2740, a specific customer installed Windows Server 2004.Service Pack 1 via RDC. After every installation of Terminal ServicesThe RDP protocol has been tuned for better listening from withinconsumer (trusted) interface.
Case 5.Create user “The client was unable to establish a Net Link connection withError information “Computer” with event ID 1036 when your husband tries toConnecting a remote computer system to a PC workstation based on Windows XP. To solve thisProblem, get a major fix from Microsoft. For more information click the buttonnext article number to find an article in MicrosoftBase: knowledge
322389(http://support.microsoft.com/kb/322389/) How to get the latest versionWindows XP command service.
When starting Windows Deployment Services on a new, newly assigned distribution point for System Center Configuration Manager, I got the following error in the application event log on the DP:
An error occurred while trying to create a UDP endpoint for the wdspxe incontinence provider x.x.x.x:67. Thiscan happen when a particular network interface has been disabled or even changed while another application is using the port at the moment. The provider should definitely not be able to receive requests through this interface.
For this reason, the DP has been configured as DHCP and a trusted server for WDS. Unfortunately WDSUTIL /set-server /UseDHCPPorts:No didn’t work. The solution was to make changes after registering:
Note: Another thing to remember is that if you are accelerating your WDS server on your DHCP server, you must specify option 060 in the DHCP server options. In quick start mode, run the following command: WDSUTIL /set-server /DHCPOption60:yes
The Configmgr Status Viewer showed the following:Download this software now to fix your PC and improve its performance.
Erreur 0x2740 Services Terminaux
Fel 0x2740 Terminaltjanster
오류 0x2740 터미널 서비스
Fout 0x2740 Terminal Services
Fehler 0x2740 Terminaldienste
Erro 0x2740 Servicos De Terminal
Error 0x2740 Servicios De Terminal
Blad 0x2740 Uslug Terminalowych
Errore 0x2740 Servizi Terminal
Oshibka 0x2740 Terminalnye Sluzhby